Epsealon Blizzard Rubber
Price range: £0.22 through £0.24
- Sold by the cm! Adjust the quantity to your chosen length.
Description
High-performance rubber band from Epsealon dipped in a special UV coating. Price per CM.
The exterior is blond/yellow and the interior is white. We stock two different diameters – 14mm and 16mm. We also stock Epsealon’s Firestorm rubber band (red exterior, black interior) in the 16mm diameter.
We sell wishbones, tie line and insertion tools separately.
Please note that this is sold by the cm. If for example you require 50cm, then please order a quantity of 50. We can also make up the bands for you. Simply select one of the options above after reading about them below.
Want us to make your speargun band?
When ordering, please choose one of the pre-made band options using the check boxes provided. Here is a description of each option:
- Rob Allen dyneema wishbone – closed loop band, common setup for RA guns.
- Looped wishbones with removable bridle – perfect if you need to undo the bridle to fix it to your speargun.
- Rob Allen metal wire wishbone and tie line – used to replace stainless steel wishbones for a sharp spear notch. Another closed loop band.
What length rubber do I need?
If you are not sure what length you need for your speargun please feel free to get in touch. However the best way forward is to check with your manufacturer if its not shown in the images above. As a general rule of thumb you can use the following equation:
Measure from the furthest notch/shark fin to the start of the muzzle hole
Multiply by 2
Divide by 2.7
= number of cm needed.
Remember that not all gun rubbers are made equally and the same is true for spears. Some spears work better when powered by a specific rubber and visa versa.
Also, be sure not to overpower your spear as this will lead to inaccuracies in your shots. Of course if you are unsure then please get in touch.
If you need any assistance, please email enquiries@spearfishing.co.uk.
